Hello,
I see in the command esxcli hardware pci list –c 0x300 –m 0xff
that y have the same IRQ for the two VGA and i think this is the problem. The people that attach print screens of this commands have diferent IRQ for the two targets.
It´s possible to change the IRQ for the VGAS.
Thanks a lot for your time.
Command:
000:001:01.0
Address: 000:001:01.0
Segment: 0x0000
Bus: 0x01
Slot: 0x01
Function: 0x00
VMkernel Name:
Vendor Name: ASPEED Technology, Inc.
Device Name: ASPEED Graphics Family
Configured Owner: Unknown
Current Owner: VMkernel
Vendor ID: 0x1a03
Device ID: 0x2000
SubVendor ID: 0x1a03
SubDevice ID: 0x2000
Device Class: 0x0300
Device Class Name: VGA compatible controller
Programming Interface: 0x00
Revision ID: 0x10
Interrupt Line: 0x0b
IRQ: 11
Interrupt Vector: 0x39
PCI Pin: 0x37
Spawned Bus: 0x00
Flags: 0x0221
Module ID: -1
Module Name: None
Chassis: 0
Physical Slot: 0
Slot Description:
Passthru Capable: false
Parent Device: PCI 0:0:20:4
Dependent Device: PCI 0:0:20:4
Reset Method: Bridge reset
FPT Sharable: false
000:005:00.0
Address: 000:005:00.0
Segment: 0x0000
Bus: 0x05
Slot: 0x00
Function: 0x00
VMkernel Name:
Vendor Name: NVIDIA Corporation
Device Name: NVIDIAQuadro 4000
Configured Owner: Unknown
Current Owner: VMkernel
Vendor ID: 0x10de
Device ID: 0x06dd
SubVendor ID: 0x10de
SubDevice ID: 0x0780
Device Class: 0x0300
Device Class Name: VGA compatible controller
Programming Interface: 0x00
Revision ID: 0xa3
Interrupt Line: 0x0b
IRQ: 11
Interrupt Vector: 0x98
PCI Pin: 0x48
Spawned Bus: 0x00
Flags: 0x0201
Module ID: 74
Module Name: nvidia
Chassis: 0
Physical Slot: 1
Slot Description:
Passthru Capable: false
Parent Device: PCI 0:0:2:0
Dependent Device: PCI 0:0:2:0
Reset Method: Bridge reset
FPT Sharable: false